Accton Technology ES4710BD - Manual (Page 156)

155
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
6.4.1 Reset specific module
Click “Device management”, “Reset specific module”, select a module number and click “Apply”,
then that module will be hot-swapped. This function is equal to the CLI command showing in 6.2.1.
Click the Reset button to confirm the selection of the module number. Note that the Active master
module is not hot-swappable.
6.4.2 Show slot
Click “Device management”, “Show slot”. An information column will display the current switch’s
module information. This function is equal to CLI command 6.2.2.1.1.