Accton Technology ES4710BD - Manual (Page 89)

88
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
under Global Mode. mode, speed,
etc.
4.2.1.1.3.2 VLAN Mode
Using the vlan command under Global Mode, you can enter the corresponding
VLAN Mode. Under VLAN Mode the user can configure all member ports of the corresponding
VLAN. Run the exit command to exit the VLAN Mode to Global Mode.
4.2.1.1.3.3 DHCP Address Pool Mode
Type the ip dhcp pool command under Global Mode to enter the DHCP Address
Pool Mode. The prompt “Switch(Config--dhcp)#” will appear. DHCP address pool
properties can be configured under DHCP Address Pool Mode. Run the exit command to exit the
DHCP Address Pool Mode to Global Mode.
4.2.1.1.3.4 Route Mode
Routing
Protocol
Entry Prompt Operates Exit
RIP Routing
Protocol
Type router
rip command
under Global
Mode.
Switch(Config-Router-Rip)# Configures
RIP protocol
parameters.
Use the “exit”
command to
return to
Global Mode.
OSPF
Routing
Protocol
Type router
ospf
command
under Global
Mode.
Switch(Config-Router-Ospf)# Configures
OSPF
protocol
parameters.
Use the “exit”
command to
return to
Global Mode.
4.2.1.1.3.5 ACL Mode
ACL type Entry Prompt Operates Exit
Standard IP
ACL Mode
Type
ip access-list
standard
command under
Global Mode.
Switch(Config-Std-Nacl-a)# Configures
parameters
for Standard
IP ACL
Mode
Use the “exit”
command to
return to
Global Mode.
Extended IP
ACL Mode
Type ip
access-list
Switch(Config-Ext-Nacl-b)
#
Configures
parameters
Use the “exit”
command to