Accton Technology ES4710BD - Manual (Page 86)

85
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
Fig 4-9 Telnet Configuration Interface
4.1.2.2 Managing the Switch through ECview
To manage the switch with ECview, the following conditions should be met:
1) Switch has an IP address configured
2) The host’s IP address and the switch’s VLAN interface IP address are in the same network
segment.
3) If not 2), the client can connect to an IP address of the switch via other devices, such as a
router
4) Network management is enabled
The computer hosting ECview should be able to ping the associated IP address of Switch so
that ECview will, upon launching, find ES4710BD to perform read/write operations. This manual
does not include information about how to manage the switch with ECview, please refer to ECview
User’s Guide for details.
4.2 Management Interface
ES4710BD provides 2 management interface: CLI (Command Line Interface) and ECview
software. This manual will focus on the CLI interface, for information about ECview, please refer to
ECview User’s Guide.