Accton Technology ES4710BD User Manual
Page 472
471
E
ES4710BD 10 Slots L2/L3/L4 Chassis Switch
Command: ip pim sparse-mode
no ip pim sparse-mode
Function: Enables PIM-SM protocol on the interface; the “no ip pim sparse-mode” command
disables PIM-SM protocol on the interface.
Parameters: N/A.
Default: PIM-SM protocol is disabled by default.
Command mode: Interface Mode
Usage Guide:
Example: Enabling PIM-SM protocol on interface vlan1.
Switch (Config)#interface vlan 1
Switch(Config-If-Vlan1)#ip pim sparse-mode
19.4.2.2.2 ip pim bsr-border
Command: ip pim bsr-border
no ip pim bsr-border
Function: This command is the configuration command for interface BSR border. It is used to
configure the border for PIM-SM area to prevent BSR message flooding outside the
local PIM-SM area; the “no ip pim bsr-border” command cancels the BSR border
configuration.
Parameters: N/A.
Default: BSR border configuration on interfaces is disabled by default.
Command mode: Interface Mode
Usage Guide: This command is the configuration commands for interface BSR border. It is used to
configure the border for PIM-SM area to prevent BSR message flooding outside the
local PIM-SM area. In other words, BSR messages inside the local PIM-SM area
cannot be transferred from this interface to the outside; to cancel the setting of BSR
border, the configuration of this command should be reverted.
Example: Enable BSR border setting on interface vlan 1.
Switch (Config)#interface vlan 1
Switch(Config-If-Vlan1)#ip pim bsr-border
19.4.2.2.3 ip pim query-interval
Command: ip pim query-interval <query interval>
no ip pim query-interval
Function: Set interval for sending PIM HELLO packets in the interface; the “no ip pim
query-interval” command restores the default setting.
Parameters: <query interval> is the interval for sending PIM HELLO packets, ranging from 1 to
18724s.
Default: The default interval for sending PIM HELLO is 30 seconds..
Command mode: Interface Mode
Usage Guide: The HELLO message enables PIM-DM switches to locate each other and establish
the neighborhood. PIM-DM switches claim their existence by sending HELLO
messages to their neighbors. If no HELLO message from a neighbor is received in a