Accton Technology ES4710BD - Manual (Page 500)

499
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
Switch#show ip igmp groups
IGMP Connect Group Membership (1 group(s) joined)
Group Address Interface Uptime Expires Last Reporter
239.255.255.250 Vlan123 02:57:30 00:03:36 123.1.1.2
Switch#
Displayed information Explanation
Group Address Multicast group IP address
Interface Interface of the multicast group
Uptime The up time of the multicast group
Expires Rest time before the multicast group timeouts
Last Reporter The host’s last reported the multicast group
19.6.4.1.2 show ip igmp interface
Command: show ip igmp interface [<ifname>]
Function: Displays IGMP related information on the interface
Parameters: is the interface name, i.e., displays IGMP information of the specified
interface.
Default: Not displayed.
Command mode: Admin Mode
Example: Displaying IGMP information of Ethernet interface vlan1.
Switch # show ip igmp interface vlan1
Vlan1 is up, line protocol is up
Internet address is 192.168.1.11, subnet mask is 255.255.255.0
IGMP is enabled, I am querier
IGMP current version is V2
IGMP query interval is 125s
IGMP querier timeout is 265s
IGMP max query response time is 10s
Inboud IGMP access group is not set
Multicast routing is enable on interface
Multicast TTL threshold is 1
Multicast designed router (DR) is 192.168.1.22
Muticast groups joined by this system: 0
19.6.4.1.3 debug ip igmp event
Command: debug ip igmp event
Function: Enables the debug function for displaying IGMP events: the "no" format of this