Accton Technology ES4710BD - Manual (Page 136)

135
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
“edgecore”. Save “Profile1”, “Profile2” and “Profile3” in the appropriate FTP server directory on
the computer.
The configuration procedures of the switch are listed below:
Switch (Config)#inter vlan 1
Switch (Config-If-Vlan1)#ip address 10.1.1.2 255.255.255.0
Switch (Config-If-Vlan1)#no shut
Switch (Config-If-Vlan1)#exit
Switch (Config)#exit
Switch#copy ftp://Switch:[email protected]/Profile1 Profile1
Switch#copy ftp://Switch:[email protected]/Profile2 Profile2
Switch#copy ftp://Switch:[email protected]/Profile3 Profile3
With the above commands, the switch will have the user profile configuration file in the computer
downloaded to the FLASH.
„ TFTP Configuration
Computer side configuration:
Start TFTP server software on the computer and place “Profile1”, “Profile2” and “Profile3” to the
appropriate TFTP server directory on the computer.
The configuration procedures of the switch are listed below:
Switch (Config)#inter vlan 1
Switch (Config-If-Vlan1)#ip address 10.1.1.2 255.255.255.0
Switch (Config-If-Vlan1)#no shut
Switch (Config-If-Vlan1)#exit
Switch (Config)#exit
Switch#copy tftp://10.1.1.1/ Profile1 Profile1
Switch#copy tftp://10.1.1.1/ Profile2 Profile2
Switch#copy tftp://10.1.1.1/ Profile3 Profile3
Scenario 5: ES4710BD acts as FTP client to view file list on the FTP server.
Synchronization conditions: The switch connects to a computer by a Ethernet port, the computer is a
FTP server with an IP address of 10.1.1.1; the switch acts as a FTP client, and the IP address of the
switch management VLAN1 interface is 10.1.1.2.