Accton Technology ES4710BD - Manual (Page 228)

227
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
10.2 MSTP Configuration
10.2.1 MSTP configuration task sequence
1. Enable MSTP and set the running mode
2. Configure instance parameters
3. Configure MSTP field parameter
4. Configure MSTP time parameter
5. Configure the fast migrate feature for MSTP
1. Enable MSTP and set the running mode
Command Explanation
Global Mode and Port Mode.
spanning-tree
no spanning-tree
Enables/Disables MSTP
Global Mode
spanning-tree mode {mstp|stp}
no spanning-tree mode
Sets MSTP running mode
Port Mode
spanning-tree mcheck Forces port migration to run under MSTP
2. Configure instance parameters
Command Explanation
Global Mode
spanning-tree mst priority
no spanning-tree mst
priority
Sets bridge priority of the specified instance
for the switch
Port Mode
spanning-tree mst cost
no spanning-tree mst cost
Sets the port route cost on a specified instance
for the current port
spanning-tree mst
port-priority
no spanning-tree mst
port-priority
Sets the port priority on a specified instance
for the current port
3. Configure MSTP field parameters