Accton Technology ES4710BD - Manual (Page 144)

143
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
5.6.3 Switch upgrade
Users should click “Switch basic configuration” and “Switch update” to configure the upgrade Node
Tree Diagram. Two categories are explained below:
z TFTP Upgrade, including
9 TFTP client service – to configure TFTP client
9 TFTP server service – to configure TFTP server
z FTP Upgrade, including
9 FTP client service – to configure FTP client
9 FTP server service – to configure FTP server
5.6.3.1 TFTP client configuration
Users should click “Switch basic configuration” and “TFTP client service” to enter into the
configuration page. Please refer to the CLI command 5.5.2.2.9.
Words and phrases are explained in the following:
Server IP address－IP address of the server.
Local file name－the local file name
Server file name－the file name of the server
Operation type－”Upload” means to upload files; “Download” means to download files
Transmission type－”ascii” means to transit files by using ASCII standard. “binary” means the files
are transmitted in the binary standard
Example: the Figure below shows how to get the system file from TFTP Server 10.1.1.1, which has
server file name is “nos.img” and local file name “nos.img.” Click “Apply” to finish.
5.6.3.2 TFTP server configuration
Users should click “Switch basic configuration” and “TFTP server service” to enter into the
configuration page.
Words and phrases are explained in the following: