Accton Technology ES4710BD - Manual (Page 352)

351
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
Switch(Config-ClassMap)# exit
Switch(Config)#policy-map p1
Switch(Config-PolicyMap)#class c1
Switch(Config--Policy-Class)#set ip precedence 5
Switch(Config--Policy-Class)#exit
Switch(Config-PolicyMap)#exit
Switch(Config)#interface ethernet 1/1
Switch(Config-Ethernet1/1)#service-policy input p1
QoS configuration in Switch2:
SWITCH#CONFIG
Switch(Config)#mls qos
Switch(Config)#interface ethernet 1/1
Switch(Config-Ethernet1/1)#mls qos trust ip-precedence pass-through-cos
16.4 QoS Troubleshooting Help
16.4.1 QoS Debug and Monitor Commands
16.4.1.1 show mls-qos
Command: show mls-qos
Function: Displays global configuration information for QoS.
Parameters: N/A.
Default: N/A.
Command mode: Admin Mode
Usage Guide: This command indicates whether QoS is enabled or not.
Example:
Switch #show mls-qos
Qos is enabled
Displayed information Explanation
Qos is enabled QoS is enabled.
16.4.1.2 show mls qos aggregate-policer
Command: show mls qos aggregate-policer [<aggregate-policer-name>]
Function: Displays policy set configuration information for QoS.
Parameters: <aggregate-policer-name> is the policy set name.
Default: N/A.