Accton Technology ES4710BD - Manual (Page 471)

470
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
1) Configure a switch as the candidate BSR.
Command Explanation
Interface Mode
ip pim bsr-candidate <ifname>
[hashlength] [Priority]
no ip pim bsr-candidate
This command is a global candidate BSR
configuration command. It is used to configure
information for PIM-SM candidate BSR and to
contend for the BSR router with the other
candidate BSRs; the “no ip pim bsr-candidate”
command cancels the BSR configuration.
2) Configure a switch as the candidate RP.
Command Explanation
Interface Mode
ip pim rp-candidate <ifname>
[group-list
access-list] [interval
interval]
no ip pim rp-candidate [<ifname>]
This command is a global candidate RP
configuration command. It is used to configure
information for PIM-SM candidate RP and to
contend for the RP router with the other candidate
RPs; the “no ip pim rp-candidate [<ifname>]”
command cancels the RP configuration.
3. Disable PIM-SM protocol
Command Explanation
Interface Mode
no ip pim sparse-mode Disables PIM-SM protocol
19.4.2.2 PIM-SM Configuration Commands
z ip pim sparse-mode
z ip pim bsr-border
z ip pim query-interval
z ip pim bsr-candidate
z ip pim rp-candidate
z show ip pim bsr-router
z show ip pim interface
z show ip pim mroute sm
z show ip pim neighbor
z show ip pim rp
z debug ip pim
z debug ip pim bsr
19.4.2.2.1 ip pim sparse-mode