beautypg.com

2 debug lacp – Accton Technology ES4710BD User Manual

Page 295

background image

294

E

ES4710BD 10 Slots L2/L3/L4 Chassis Switch

Collecting

Whether status of port bound status machine is “collecting” or not.

Distributing

Whether status of port bound status machine is “distributing” or

not.

Defaulted

Whether the local port is using default partner end parameter.

Expired

Whether status of port receiving status machine is “expire” or not.

Selected

Whether the port is selected or not..

5. Display port-channel information for port-group1.

Switch#

show port-group 1 port-channel

Port channels in the group 1:

-----------------------------------------------------------

Port-Channel: port-channel1

Number of port : 2 Standby port : NULL

Port in the port-channel :

Index Port Mode

------------------------------------------------------

1 Ethernet1/1 active

2 Ethernet1/2 active
Displayed information

Explanation

Port channels in the group

If port-channel does not exist, the above information will not be
displayed.

Number of port

Port number in the port-channel.

Standby port

Port that is in “standby” status, which means the port is qualified to
join the channel but cannot join the channel due to the maximum
port limit, thus the port status is “standby” instead of “selected”.

13.4.1.2 debug

lacp

Command: debug lacp

no debug lacp

Function: Enables the LACP debug function: “no debug lacp” command disables this debug

function.

Command mode: Admin Mode
Default: LACP debug information is disabled by default.
Usage Guide: Use this command to enable LACP debugging so that LACP packet processing

information can be displayed.

Example: Enabling LACP debug.