Accton Technology ES4710BD - Manual (Page 115)

114
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
configured secure address.
4. Configuring TRAP
Command Explanation
snmp-server enable traps
no snmp-server enable traps
Sets the switch to enable to send Trap
messages; the “no snmp-server enable traps”
command disables Trap messages.
snmp-server host
no snmp-server host
Sets the IP address and Trap community string
of the NMS to receive SNMP trap messages;
the “no snmp-server host ”
command deletes the IP address of the NMS to
receive SNMP Trap messages.
5. Enable/Disable RMON
Command Explanation
rmon enable
no rmon enable
Enables/Disables RMON
5.4.4.2 SNMP Configuration Commands
5.4.4.2.1 rmon
Command: rmon enable
no rmon enable
Function: Enables the RMON function in the switch: the “no rmon enable” command disables the
RMON function.
Command mode: Global Mode
Default: RMON is enabled by default.
Example:
Enabling RMON.
Switch(Config)#rmon enable
Disabling RMON.
Switch(Config)#no rmon enable
5.4.4.2.2 snmp-server community
Command: snmp-server community {ro|rw}
no snmp-server community
Function: Configures the community string for the switch: the “no snmp-server community
” command deletes the configured community string.
Command mode: Global Mode