beautypg.com

Accton Technology ES4710BD User Manual

Page 190

background image

189

E

ES4710BD 10 Slots L2/L3/L4 Chassis Switch

8.5.1.2.2 MAC Address Binding Configuration Commands

8.5.1.2.2.1 switchport port-security

Command: switchport port-security

no switchport port-security

Function: Enables the MAC address binding function for the port: the “no switchport

port-security” command disables the MAC address binding function for the port.

Command mode: Interface Mode

Default: MAC address binding is not enabled by default.

Usage Guide: The MAC address binding function, Spanning Tree and Port Aggregation functions

are mutually exclusive. Therefore, if the MAC binding function for a port is to be enabled, the

Spanning Tree and Port Aggregation functions must be disabled, and the port enabling MAC address

binding must not be a Trunk port.

Example: Enabling the MAC address binding function for port 1

Switch(Config)#interface Ethernet 1/1

Switch(Config-Ethernet1/1)#switchport port-security

8.5.1.2.2.2 switchport port-security convert

Command: switchport port-security convert

Function: Converts dynamic secure MAC addresses learned by the port to static secure MAC

addresses, and disables the MAC address learning function for the port.

Command mode: Interface Mode

Usage Guide: The port dynamic MAC convert command can only be executed after the secure port

is locked. After this command has been executed, dynamic secure MAC addresses learned by the

port will be converted to static secure MAC addresses. The command does not reserve

configuration.

Example: Converting MAC addresses in port 1 to static secure MAC addresses.

Switch(Config)#interface Ethernet 1/1

Switch(Config-Ethernet1/1)#switchport port-security convert

8.5.1.2.2.3 switchport port-security lock

Command: switchport port-security lock

no switchport port-security lock