Accton Technology ES4710BD - Manual (Page 129)

128
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
Special Keywords in filename
keyword Source/Target IP address
running-config Active configuration file
startup-config Start up configuration file
nos.img System file
Boot.rom System boot file
Command mode: Admin Mode
Usage Guide: The command provides command line prompt messages. If the user enters a
command like copy ftp:// or copy ftp:// and presses Enter, the following
prompt will appear:
ftp server ip address [x.x.x.x] :
ftp username>
ftp password>
ftp filename>
This prompts for the FTP server address, username, password and file name.
Example:
（ 1）Saving the mirror in FLASH to FTP server 10.1.1.1, the login username for the FTP server is
“Switch”, and the password is “edgecore”.
Switch#copy nos.img ftp://Switch:[email protected]/nos.img
（ 2）Get the system file nos.img from FTP server 10.1.1.1, the login username for the FTP server is
“Switch”, and the password is “edgecore”.
Switch#copy ftp://Switch:[email protected]/nos.img nos.img
（ 3）Save active configuration file:
Switch#copy running-config startup-config
Related command: write
5.5.2.2.4 dir
Command: dir
Function: checks the list for files in the FTP server
Parameters: < ftp-server-url > takes the following format:
ftp://:@<ipaddress>, where is the FTP username,
is the FTP user password, <ipaddress> is the IP address of FTP server.
Command mode: Global Mode