Accton Technology ES4710BD - Manual (Page 530)

529
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
20.5.1.2 RADIUS authentication configuration
Click “Authentication configuration”, “RADIUS client configuration”, “RADIUS authentication
configuration” to configure the RADIUS authentication server IP address and monitor port ID.
Equivalent to CLI command 20.2.2.17.
z
Authentication server IP – Server IP address. Authentication server port (optional) - Is the
server monitor port ID, with range: 0~65535, where “0” means it’s not working as an
authentication server.
z Primary authentication server – Primary Authentication server, is the primary server;
Non-Primary Authentication server, is the non-primary server.
z Operation type – Add authentication server, adds an authentication server; Remove
authentication server, remove an authentication server.
Example: Configure Authentication server IP as 10.0.0.1, Authentication server port as default port,
select Primary Authentication server, choose Operation type as “Add authentication server”, and
then click the Apply button, to add this authentication server.