Accton Technology ES4710BD - Manual (Page 46)

45
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
1.4.2.4.2 Front Panel - Indicator
The following table describes the front panel indicators for the EM4700BD-2XG-XENPAK:
Table 1.8 Description of the EM4700BD-2XG-XENPAK indicators
LED
Indicator
Panel
Symbol
Status Description
On (green) Card powered.
Power
Indicator
PWR
Off Card powered off
On (Green, blinks at 1 Hz) Card operating normally
On (Green, blinks at 8 Hz)
System is loading (Booting after cards hot
swapping)
On (Yellow, blinks at 8 Hz)
System is shutting down (Shutting Down
after SWAP button pressed)
On (Red, blinks at 8 Hz) Malfunction status
Operation
indicator
RUN
Off Card is powered off and can be removed.
XENPAK port indicator
On (Green)
Network connection on XENPAK
transceiver is normal
Status
indicator:
Link
Off
No network connection present on
XENPAK transceiver
Transmission
Indicator
Act Blinking (Green) Sending or receiving data
1.4.2.4.3 Front Panel Port Description
EM4700BD-2XG-XENPAK provides 2 XENPAK 10Gb fiber transceiver slots;
Table 1.9 XENPAK port descriptions
Port Type Specification
XENPAK
z XENPAK-SC transceiver (10GBASE-LR LAN-PHY)
(Agilent HFCT-701XB, LAN mode, wavelength 1310nm)：
62.5/125 µm multi-mode fiber (MMF): 300m
9/125 µm single-mode fiber (SMF): 10Km
1.4.2.4.4 Front Panel – Reset Button
The EM4700BD-2XG-XENPAK provides a RESET button for resetting the board.