Accton Technology ES4710BD - Manual (Page 527)

526
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
Supplicant 00-03-0F-FE-2E-D3
Authenticator State Machine
State Authenticated
Backend State Machine
State Idle
Reauthentication State Machine
State Stop
Displayed information Explanation
Global 802.1x Parameters Global 802.1x parameter information
reauth-enabled Whether re-authentication is enabled or not
reauth-period Re-authentication interval
quiet-period Silent interval
tx-period EAP retransmission interval
max-req EAP packet retransmission interval
authenticator mode Switch authentication mode
Mac Filter Enables dot1x address filter or not
MacAccessList Dot1x address filter table
dot1x-EAPoR Authentication method used by the switch (EAP relay, EAP
local end)
802.1x is enabled on ethernet 1 Indicates whether dot1x is enabled for the port
Authentication Method: Port authentication method (MAC-based, port-based)
Status Port authentication status
Port-control Port authorization status
Supplicant Authenticator MAC address
Authenticator State Machine Authenticator state machine status
Backend State Machine Backend state machine status
Reauthentication State Machine Re-authentication state machine status
20.4.1.6 debug aaa
Command: debug aaa
no debug aaa
Function: Enables AAA debugging information; the “ no debug aaa” command disables the AAA
debugging information.
Command mode: Admin Mode
Parameters: N/A.
Usage Guide: Enabling AAA debugging information allows the check of RADIUS negotiation