Accton Technology ES4710BD - Manual (Page 491)

490
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
19.5.4.1.5 debug ip dvmrp detail
Command: debug ip dvmrp detail
Function: Enables the debug function for displaying detailed DVMRP information; the “no” format
of this command disables this debug function.
Parameters: N/A.
Default: Disabled.
Command mode: Admin Mode
Usage Guide: If detailed information about DVMRP packets (except prune and graft) is required,
this debug command can be used.
Example:
Switch#debug ip dvmrp detail
DVMRP detail debug is on
Switch#01:18:09:35: DVMRP: Received probe on vlan1 from 192.168.1.22
01:18:09:35: DVMRP: probe Vers: majorv 3, minorv 255
01:18:09:35: DVMRP: probe flags: PG
01:18:09:35: DVMRP: probe genid: 0x48
01:18:09:35: DVMRP: probe nbrs: 192.168.1.11
01:18:09:40: DVMRP: Send probe on vlan1 to 224.0.0.4, len 16
01:18:09:40: DVMRP: probe Vers: majorv 3, minorv 255
01:18:09:40: DVMRP: probe flags: PG
01:18:09:40: DVMRP: probe genid: 0x24c57
01:18:09:40: DVMRP: probe nbrs: 192.168.1.22
01:18:09:40: DVMRP: Send probe on dvmrp2 to 224.0.0.4, len 12
01:18:09:40: DVMRP: probe Vers: majorv 3, minorv 255
01:18:09:40: DVMRP: probe flags: PG
01:18:09:40: DVMRP: probe genid: 0x24f29
19.5.4.1.6 debug ip dvmrp pruning
Command: debug ip dvmrp pruning
no debug ip dvmrp pruning
Function: Enables the debug function for displaying DVMRP prune/graft information; the “debug
ip dvmrp pruning” command disables this debug function.
Parameters: N/A.
Default: Debug is disabled by default.
Command mode: Admin Mode
Usage Guide: If detailed DVMRP prune/graft information is required, this debug command can be
used.
Example:
Switch#debug ip dvmrp pruning