Accton Technology ES4710BD - Manual (Page 143)

142
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
5.6.2.4 SNMP statistics
When users click “Switch basic configuration”, “SNMP configuration” and “SNMP statistics”, a
variety of counter information will appear. Please refer to the CLI command
5.4.6.1.1.
5.6.2.5 RMON and trap configuration
Users should click “Switch basic configuration”, “SNMP configuration” and “RMON and TRAP
configuration” to configure the RMON function of the switch.
z Snmp Agent state –open/close the switch to be SNMP agent server function. Please refer to the
CLI command 5.4.4.2.3.
z RMON state – open/close RMON function of the switch. Please refer to the CLI command
5.4.4.2.1.
z Trap state – allows device to send Trap messages, Please refer to the CLI command 5.4.4.2.4
Example: choose Snmp Agent state as “Open”, choose RMON state as “Open”, and choose Trap
state as “Open”. Then click on the “Apply” button.