Accton Technology ES4710BD - Manual (Page 478)

477
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
192.2.1.1 Vlan2 31 00:11:39 00:01:16 /
192.4.1.4 Vlan4 33 00:11:39 00:01:44 DR
192.4.1.3 Vlan4 33 00:11:39 00:01:17 /
Switch #
Displayed information Explanation
Neighbor-Address Neighbor address
Interface The neighbor interface discovered
ifIndex Interface index number
Uptime The up time of the neighbor since discovery
Expires The remaining time before considering the
neighbor to be invalid
DR-state Whether the neighbor is a DR
19.4.4.1.5 show ip pim rp
Command: show ip pim rp [mapping | group-address]
Function: Displays PIM RP related information
Parameters: mapping displays the group address and RP association.
group-address is the group address.
Default: No display by default.
Command mode: Admin Mode
Function: Displaying the RP information for PIM area 226.1.1.1.
Switch #show ip pim rp 226.1.1.1
RP Address for this group is: 192.2.1.1
Displayed information Explanation
RP Address RP address of the group
19.4.4.1.6 debug ip pim
z Command: debug ip pim
Function: Enables the debugging function for displaying detailed PIM information; the “no” format
of this command disables this debug function.
Parameters: N/A.
Default: Disabled.
Command mode: Admin Mode
Usage Guide: If detailed information about PIM packets etc. is required, this debugging command
can be used.
Example:
Switch # debug ip pim
PIM debug is on