Accton Technology ES4710BD - Manual (Page 265)

264
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
11.5.3 IGMP snooping static multicast configuration
Click “IGMP Snooping static multicast configuration” to enter the configuration screen. The page is
divided into configuration section and display section.
11.5.3.1 IGMP snooping static multicast configuration
The description for each parameter is as follows:
z
VLAN ID－configures the Vlan ID
z Multicast group member port
z Multicast address－configures the multicast address.
z Operation type－adds or removes the static multicast member
This is equivalent to the CLI command 11.2.2.4.
To add the static multicast address, select the VLAN to be configured from the VLAN ID list. Select
a port from the Multicast group member port, fill in the Multicast address, choose Add from the
Operation type, click on Apply.
11.5.3.2 IGMP snooping display
Select a VLAN from the VLAN ID list in the static multicast configuration. The display section will
display the IGMP snooping information for that particular VLAN
This is equivalent to the CLI command 11.4.1.1.