Accton Technology ES4710BD - Manual (Page 495)

494
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
ip igmp static-group <A.B.C.D >
no ip igmp static -group <A.B.C.D >
Joins the interface to a static IGMP group; the “no
ip igmp static -group” command cancels the join.
(2) Configure IGMP query parameters.
a. Configure transmission interval of query packets in IGMP
b. Configure maximum response time for IGMP queries
c. Configure timeout setting for IGMP queries
Command Explanation
Interface Mode
ip igmp query-interval <time_val>
no ip igmp query-interval
Sets the interval for sending IGMP query
messages; the “no ip IGMP query interval”
command restores the default setting.
ip igmp query-max-response-time
<time_val>
no ip igmp query-max-response-time
Sets the maximum time for an interface to
response to an IGMP query; the “no ip igmp
query-max-response-time” command restores the
default setting.
ip igmrp query-timeout <time_val>
no ip igmp query-timeout
Sets the timeout interval for an interface to
response to an IGMP query; the “no ip igmp
query-timeout” command restores the default
setting.
(3) Configure IGMP version
Command Explanation
Interface Mode
ip igmp version <version>
no ip igmp version
Configures the IGMP version of the interface; the
“no ip igmp version” command restores the
default setting.
3. Disable IGMP
Command Explanation
Interface Mode
no ip dvmrp enable | no ip pim
dense-mode | no ip pim sparse-mode
Disables IGMP
19.6.2.2 IGMP Configuration Commands
z ip igmp access-group
z ip igmp join-group
z ip igmp query-interval
z ip igmp query-max-response-time
z ip igmp query-timeout
z ip igmp static-group