Accton Technology ES4710BD - Manual (Page 149)

148
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
5.6.6 Switch on-off information
Users should click “Switch on-off information” to enter into the configuration page and make
configuration nodes.
Words and phrases are explained in the following:
RIP Status－on-off switch of RIP. (“Open” or “Close”) Refer to the CLI command 18.3.2.2.17.
IGMP Snooping－on-off switch of IGMP Snooping. (“Open” or “Close”) Refer to the CLI
command 11.2.2.1.
Switch GVRP Status－on-off switch of GVRP. (“Open” or “Close”) Refer to the CLI command
9.3.2.5.
Example: open IGMP Snooping and close RIP and GVRP, and then click on the “Apply” button.
5.6.7 Switch Maintenance
On the left directory of the root page, users should click “Switch maintenance” to configure
maintenance nodes through web interface.
5.6.7.1 Web server user configuration
Users should click “Switch maintenance”, “Web server user configuration” to configure web-user
information. Words and phrases are explained in the following:
z User name－to configure a specific name of the web user
z Password－to configure a specific password
z Encrypted text－to configure whether the password is encrypted when displaying
configuration information.
z Operation－includes “Remove user” and “Add user”
Example: set the web user name as “switch” and the password as “switch” and then click on the
“Apply” button.