beautypg.com

Accton Technology ES4710BD User Manual

Page 161

background image

160

E

ES4710BD 10 Slots L2/L3/L4 Chassis Switch

the port. For example, a bandwidth limit of 101 M (or more) cannot be set for a 10/100M Ethernet

port. But for a 10/100/1000M port working under 100M, a bandwidth limit of 101M (or more) is

permitted.

Example: setting the bandwidth limit of ports 1 – 8 of slot 3’s card to 40M.

Switch(Config)#interface ethernet 3/1-8

Switch(Config-Port-Range)#bandwidth control 40 both

7.2.1.2.2 combo-forced-mode

Command: combo-forced-mode {copper-forced | copper-preferred-auto | sfp-forced |

sfp-preferred-auto }

no combo-forced-mode

Function: Sets to combo port mode (combo ports only); the “no combo-forced-mode” command

restores to default combo mode for combo ports, i.e., fiber ports first.

Parameters: copper-forced forces use of copper cable ports; copper-preferred-auto for copper

cable port first; sfp-forced for fiber cable forces to use fiber cable port; sfp-preferred-auto for fiber

cable port first.

Command mode: Interface Mode

Default: The default setting for combo mode of combo ports is fiber cable port first.

Usage Guide: The combo mode of combo ports and the port connection condition determines the

active port of the combo ports. A combo port consist of one fiber port and a copper cable port. It

should be noted that the speed-duplex command applies to the copper cable port while the

negotiation command applies to the fiber cable port, they should not conflict. For combo ports, only

one, a fiber cable port or a copper cable port, can be active at a time, and only this port can send and

receive data normally.

For the determination of the active port in a combo port, see the table below. The headline row in

the table indicates the combo mode of the combo port, while the first column indicates the

connection conditions of the combo port, in which “connected” refers to a good connection of fiber

cable port or copper cable port to the other devices.

Copper

forced

Copper

preferred

SFP forced

SFP

preferred

Fiber connected, copper

not connected

Copper cable

port

Fiber cable

port

Fiber cable

port

Fiber cable

port

Copper connected, fiber

not connected

Copper cable

port

Copper cable

port

Fiber cable

port

Copper cable

port

Both fiber and copper

are connected

Copper cable

port

Copper cable

port

Fiber cable

port

Fiber cable

port

Neither fiber nor copper

are connected

Copper cable

port

Fiber cable

port

Fiber cable

port

Fiber cable

port