Accton Technology ES4710BD - Manual (Page 511)

510
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
2. Access management unit property configuration
1) Configure port authentication status
2) Configure port access management method
Command Explanation
Global Mode
aaa enable
no aaa enable
Enables the AAA authentication function in the switch; the
“no aaa enable” command disables the AAA authentication
function.
aaa-accounting enable
no aaa-accounting enable
Enables the accounting function in the switch; the “no
aaa-accounting enable” command disables the accounting
function
dot1x enable
no dot1x enable
Enables the 802.1x function in the switch and ports; the "no
dot1x enable" command disables the 802.1x function.
dot1x privateclient enable
no dot1x privateclient enable
Enables the switch to force client software to use
Edge-Core’s proprietary 802.1x authentication packet format;
the “no dot1x privateclient enable” command disables the
function and allow the client software to use standard 802.1x
authentication packet format.
Command Explanation
Port Mode
dot1x port-control
{auto|force-authorized|force-u
nauthorized }
no dot1x port-control
Sets the 802.1x authentication mode; the “no dot1x
port-control” command restores the default setting.
Command Explanation
Port Mode
dot1x port-method {macbased
| portbased}
no dot1x port-method
Sets the port access management method; the “no dot1x
port-method” command restores MAC-based access
management.
dot1x max-user
no dot1x max-user
Sets the maximum number of access users for the specified
port; the “no dot1x max-user” command restores the default
setting of allowing 1 user.