Accton Technology ES4710BD - Manual (Page 331)

330
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
15.4.2 Request interval configuration
Click “SNTP configuration”, “Request interval configuration” to configure the sending request time
interval from SNTP client to NTP/SNTP server. Same as CLI command 15.1.2.
Example: Configure Interval as 128 minutes, Click Apply to set the configuration in the switch.
15.4.3 Time difference
Click “SNTP configuration”, “Time difference” to configure the SNTP client time zone and UTC
time difference. Same as CLI command 15.1.3.
z
Time zone – configures time zone
z Time difference – configures time difference
z Add – means the configured time zone is the + UTC time
z Subtract – means the configured time zone is the - UTC time
Example: Configure time zone as Beijing, select Add, set the time difference as 8, and then, click
Apply to set the configuration in the switch .
15.4.4 Show SNMP
Click “SNTP configuration”, “Show sntp” to display the SNTP client current configuration and
server status. Same as CLI command 15.3.1.1.