Accton Technology ES4710BD - Manual (Page 255)

254
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
11.2.2.4 ip igmp snooping vlan static
Command: ip igmp snooping vlan static interface
–name>
no ip igmp snooping vlan static
Function: Enables the IGMP Snooping static multicast group membership: the “no ip igmp
snooping vlan static ” command disables the function.
Parameters: stands for the specified VLAN number; <multicast-ip-addr> for multicast
MAC address; for multicast group member port. .
Command mode: Global Mode
Default: No static multicast group is set by default.
Usage Guide: If the static multicast address to be added exists and is a dynamic address, the static
address overwrites the dynamic one.
Example: Creating a new static multicast address 224.1.1.1 in VLAN 100 and including port 1/6 in
the group.
Switch(C onfig)#ip igmp snooping vlan 100 static 224.1.1.1 interface ethernet 1/6
Delete static multicast address 224.1.1.1 in VLAN 100.
Switch(C onfig)#no ip igmp snooping vlan 100 static 224.1.1.1
11.2.2.5 ip igmp snooping vlan immediate-leave
Command: ip igmp snooping vlan immediate-leave
no ip igmp snooping vlan immediate-leave
Function: Enables the IGMP fast leave function for the specified VLAN: the “no ip igmp snooping
vlan immediate-leave” command disables the IGMP fast leave function.
Parameters: is the VLAN number specified.
Command mode: Global Mode
Default: This function is disabled by default.
Usage Guide: Enabling IGMP fast leave function speeds up the process for port to leave multicast
group. This command is valid only in Snooping, and is not applicable to Query.
Example: Enabling the IGMP fast leave function for VLAN 100.
Switch(C
onfig)#ip igmp snooping vlan 100 immediate-leave
11.2.2.6 ip igmp snooping vlan query
Command: ip igmp snooping vlan query
no ip igmp snooping vlan query
Function: Enables the IGMP Query function for the specified VLAN: the “no ip igmp snooping
vlan query” command disables the Query function.