Accton Technology ES4710BD - Manual (Page 256)

255
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
Parameters: is the VALN number specified.
Command mode: Global Mode
Default: IGMP Query is disabled by default.
Usage Guide: Before enabling the IGMP Query function for the specified VLAN, the switch must
have a corresponding VLAN configured and IGMP Snooping enabled. It should be
noted that this command cannot be used with ip igmp snooping vlan
command, i.e., either snooping or query can be enabled for one VLAN, but not both.
Example: Enabling the IGMP Query function for VLAN 100.
Switch(C
onfig)#ip igmp snooping vlan 100 query
11.2.2.7 ip igmp snooping vlan query robustness
Command: ip igmp snooping vlan query robustness
no ip igmp snooping vlan query robustness
Function: Enables the IGMP Query function for the specified VLAN: the “no ip igmp snooping
vlan query robustness” command restores the default setting.
Parameters: <vlan-id> is the specified VLAN number; is robustness
parameter, the valid range is 2 to 10.
Command mode: Global Mode
Default: The default robustness parameter is 2.
Usage Guide: A larger robustness parameter means worse network conditions; smaller robustness
parameter means better network conditions. The user can set the robustness
parameter according to their network conditions.
Example: Setting the robustness parameter for the IGMP Query of VLAN 100 to 3.
Switch(C
onfig)#ip igmp snooping vlan 100 query robustness 3
11.2.2.8 ip igmp snooping vlan query interval
Command: ip igmp snooping vlan query interval
no ip igmp snooping vlan query interval
Function: Sets the IGMP Query interval for the specified VLAN; the “no ip igmp snooping vlan
query interval” command restores the default setting.
Parameters: <vlan-id> is the specified VLAN number; is the query interval, valid
range is 1 to 65535.
Command mode: Global Mode
Default: The default interval is 125 seconds.
Example: Setting the IGMP Query interval for VLAN 100 to 60 seconds.
Switch(C
onfig)#ip igmp snooping vlan 100 query interval 60
11.2.2.9 ip igmp snooping vlan query max-response-time
Command: ip igmp snooping vlan query max-response-time
no ip igmp snooping vlan query max-response-time
Function: Sets the maximum IGMP Query response time for the specified VLAN; the “no ip igmp
snooping vlan query max-response-time” command restores the default
setting.