beautypg.com

1 device management brief, 2 device management configuration, Chapter 6 device management – Accton Technology ES4710BD User Manual

Page 152

background image

151

E

ES4710BD 10 Slots L2/L3/L4 Chassis Switch


Chapter 6 Device Management

6.1 Device Management Brief

The device management function of ES4710BD provides information about line card status,

line card operation debugging, power supply and fan status. This function enables the maintenance

and management of the physical devices and restart of the switch and line cards, and hot swapping

of the cards. ES4710BD supports dual-master mode. If 2 master control boards are present in the

system, the master control board in the smaller slot number becomes the Active Master and the other

board becomes the Standby Master.

6.2 Device Management Configuration

5.6.1 SWITCH BASIC CONFIGURATION

Command: reset slot <slotno>

Function: Resets specified card.

Parameters: < slotno> is the slot number, or the card located in that slot, the valid range is 1 to 4,

M1, M2, and 5 to 8.

Command mode: Admin Mode

Usage Guide: This command can reset all line cards and Standby Master board, but not the Active

Master board.

6.2.2 Device Management Troubleshooting Help

6.2.2.1 Monitor and Debug Commands

6.2.2.1.1 show slot

Command: shows slot [<slotno>]

Function: Shows basic information of the specified card.

Parameters: < slotno> is the slot number, or the card located in that slot, the valid range is 1 to 4,

M1, M2, and 5 to 8.

Default: If no slotno is specified, information for all cards is listed by default.

Command mode: Admin Mode