Accton Technology ES4710BD - Manual (Page 299)

298
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
obtained dynamically can be different every time; manually bound IP address will be the same all
the time. 2) The lease period of IP address obtained dynamically is the same as the lease period of
the address pool and is limited; the lease of manually bound IP address is theoretically endless. 3)
Dynamically allocated addresses cannot be bound manually. 4) Dynamic DHCP address pool can
inherit the network configuration parameters of the dynamic DHCP address pool of the related
segment.)
14.2 DHCP Server Configuration
14.2.1 DHCP Sever Configuration Task Sequence
1. Enable/Disable DHCP server
2. Configure DHCP Address pool
(1) Create/Delete DHCP Address pool
(2) Configure DHCP address pool parameters
(3) Configure manual DHCP address pool parameters
3. Enable logging for address conflicts
1. Enable/Disable DHCP server
Command Explanation
Global Mode
service dhcp
no service dhcp
Enables DHCP server
2. Configure DHCP Address pool
(1) Create/Delete DHCP Address pool
Command Explanation
Global Mode
ip dhcp pool <name>
no ip dhcp pool <name>
Configures DHCP Address pool
(2) Configure DHCP address pool parameters
Command Explanation
DHCP Address Pool Mode
network-address
[mask | prefix-length]
no network-address
Configures the address scope that can be
allocated to the address pool
default-router
[address1[address2[…address8]]]
no default-router
Configures default gateway for DHCP clients