Accton Technology ES4710BD - Manual (Page 466)

465
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
debug ip pim
Enables the debugging function for displaying
detailed PIM information; the “no” format of this
command disables this debug function.
19.3.4.2 show ip pim mroute dm
Command: show ip pim mroute dm
Function: Displays the PIM-DM packet forwarding entry
Parameters: N/A.
Default: No display by default.
Command mode: Admin Mode
Usage Guide: This command is used to display PIM-DM multicast forwarding entries, or the
forwarding entries in the system FIB table for forwarding multicast packets.
Example: Displaying all PIM-DM packet forwarding entries.
Switch#sh ip pim mroute dm
BIT Proto: DVMRP 0x2, PIM 0x8, PIMSM 0x10, PIMDM 0x20;
Flags: RPT 0x1, WC 0x2, SPT 0x4, NEG CACHE 0x8, JOIN SUPP 0x10;
Downstream: IGMP 0x1, NBR 0x2, WC 0x4, RP 0x8, STATIC 0x10;
PIMDM Group Table, inodes 7 routes 4:
(5.1.1.100, 225.0.0.1), protos: 0x8, flags: 0x4, 00:22:21/00:03:30
Incoming interface : Vlan3, RPF Nbr 0.0.0.0, pref 0, metric 0
Outgoing interface list:
(Vlan1), protos: 0x2, UpTime: 00:22:21, Exp:/
Prune interface list:
(Vlan2), protos: 0x2, UpTime: 00:22:21, Exp: 00:03:07
(5.1.1.100, 225.0.0.2), protos: 0x8, flags: 0x4, 00:18:52/00:03:30
Incoming interface : Vlan3, RPF Nbr 0.0.0.0, pref 0, metric 0
Outgoing interface list:
(Vlan1), protos: 0x2, UpTime: 00:18:52, Exp:/
Prune interface list:
(Vlan2), protos: 0x2, UpTime: 00:18:52, Exp: 00:02:51
Switch#
Displayed information Explanation
(5.1.1.100, 225.0.0.1) Forwarding entry
Incoming interface Incoming interface or RPF interface