2 configuring vlan1 interface – Accton Technology ES4710BD User Manual

Page 72

ES4710BD 10 Slots L2/L3/L4 Chassis Switch

Selection number:

The corresponding menu items in Chinese are:

配置菜

[0]:配置交机主机名

[1]:配置 Vlan1 的接口

[2]:配置交机 Telnet 服器

[3]:配置交机 Web 服器

[4]:配置 SNMP

[5]:退出 setup 模式不保存配置果

[6]:退出 setup 模式保存配置果

序号

3.1.2 Setup Submenu

3.1.2.1 Configuring switch hostname

Select “0” in the Setup main menu and press Enter, the following screen will appear:

Please input the host name[ES4710BD]:

The corresponding prompt in Chinese is:

入交

机主机名

[ES4710BD]:

Note: the hostname should be less than 30 characters. If the user presses Enter without input, the

hostname will be set to default “ES4710BD”.

3.1.2.2 Configuring Vlan1 Interface

Select “1” in the Setup main menu and press Enter to start configuring the Vlan1 interface:

Config Interface-Vlan1

[0]: Config interface-Vlan1 IP address

[1]: Config interface-Vlan1 status

[2]: Exit

Selection number: