8 rear panel, 9 side panels – Accton Technology ES4710BD User Manual
Page 52
51
E
ES4710BD 10 Slots L2/L3/L4 Chassis Switch
1.4.8 Rear Panel
The rear panel of the ES4710BD covers the switch backplane. To ensure safe operation of the
switch, please do not open the rear panel. There are two reversible handles on the rear panel, they
are used only for the installation and removal of the rear panel. Never lift or move the switch with
these handles! The rear panel is shown below:
Fig 1-9 Rear panel and side view
1.4.9 Side Panels
There are several rows of ventilation openings in the left and right sides of the switch, as shown
above.
Please do not block the ventilation openings and ensure that enough clearance is left on both sides of
the switch for air circulation. Failure to do so can cause the chassis to overheat and the system to fail,
or damage to components.