Clear-Com HX System Frames - Manual (Page 97)

True both Enable Assignment as Listen and Enable Assignment as Talk are forced to
the True state. If either or both of these settings is then changed to False the Default
Assign as Talk and Forced Listen setting is automatically changed to False.
When this setting is False the Enable Assignment as Listen and Enable Assignment as
Talk settings can be set normally.
The default setting is False.
Note: This functionality only takes effect when making assignments on a V-Series panel.
Fast key assign
Enables the panel for Fast Key Assign. This facility allows the panel operator to locally
assign panel keys to local or remote ports by direct input of the port number into the dial
pad. The panel operator can also assign keys directly from sort groups.
The Eclipse HX scalable dialcode scheme for Fast Key Assign is as follows:
For example, Matrix 1 > Hardware ports > Port 1 would be dialled into the dial pad as
0101001
.
The entity types are:
Entity Number
Hardware port 01
Partyline 02
Fixed Group 03
IFB 04
Table 5-3 Fast Key Assign Entity types
Local fast key assign shortcut
If you are using Fast Key Assign on the local system, you do not have to enter the matrix
type and entity type.
To expedite Fast Key Assign on a local system:
1) On the V-Series panel dial pad, select # to enter Fast Key Assign mode.
2) Enter the number of the port you want (for example, 001).
3) To validate the entry, select
*
on the dial pad.
Note: For more information about Fast Key Assign, see the V-Series Panel Guide.
Note: Fast Key Assign can only be used on V-Series panels with dial pads (numeric keypads).
Protect port from assignment
Prevents this port from being locally assigned by another panel in soft mode.
Sort groups
Opens a drop down menu so that sort group memberships can be edited and applied.
Note: Not on Concert, AES Mono and Panel Aux.
97 Eclipse EHX Software User Guide