Local assignment, Interlock group – Clear-Com HX System Frames User Manual
Page 203
Figure 7-33 Key Assignment Menu
The activation options are: Talk, Listen, Talk and Listen, Talk and Forced Listen or Dual
Talk and Listen.
• Talk sets a talk from the I-Series panel to a destination with no automatic listen to
the destination.
• Listen sets a key to listen to the source without talking to the destination at the
same time. Use as a monitor key. Press the volume level up/down buttons under
the display to increase listen level.
• Talk and Listen sets a talk key with listen. Press the volume level up/down buttons
under the display to increase or mute the listen level.
• Talk and Forced Listen sets a talk key with permanently made listen. Press the
volume level up/down buttons under the display to increase or mute the listen
level.
• Dual talk and Listen sets a Dual talk and listen key. This makes the pushbutton
activate a Talk and Listen on a press and hold or latch a Listen with a short press
and release (less than 200ms) on the same pushbutton.
Local assignment
1)
Select Local Assignment to display the available options for local key
assignment. The options are to allow local key assignment to overwrite the
selected key or to disallow local key assignment to overwrite the selected key.
This permits the system administrator to limit the keys a panel operator can
overwrite when locally assigning keys by Fast Key Assign (V-Series only) or by
Local Key Assignment (on panels supporting this facility).
Interlock group
The EHX user can assign several keys on a panel into a selector group and restrict the
group so that only one key of the group can be activate at any one time. This function only
refers to talk paths.
For example if a panel had five keys programmed to talk to cameras 1 to 5 then by setting
these into an interlocked group only one camera key can be selected at a time.
There are nine available interlocked groups to which the EHX user can assign any or all
panel keys.
The interlock groups are specific to the panel they are programmed for and do not affect
interlock groups that may be set up on any other panel in the system.
203
Eclipse EHX Software User Guide