Clear-Com HX System Frames - Manual (Page 209)

7) From the Eclipse HX Downloads menu, click Apply and Reset.
EHX uploads the information to the panel.
7.9 Setting up assignment panel fixed group membership
options
A fixed group occurs when one source needs to call many destinations at one time.
Members of a fixed group may be added or removed by the panel operator in real time
with the assignment panel provided this feature is enabled for the panel in EHX. To enable
the feature in EHX
1) Open the required map configuration in EHX.
2) From the Cards and ports screen, select the required panel.
3) From Port Properties, select Fixed Group Assignment from AP Panel Options.
Click the drop-down box to turn the feature on or off.
• When the check box reads true the feature is on.
• When the check box reads false the feature is off.
4) From Panels in the Configuration menu select the required panel or the panel to
which the AP22 is connected. If the AP22 is to be configured select the AP22
panel in the list of expansion panels to the right of the main panel list.
5) Assign the fixed group source as a talk key on the assignment panel on screen.
6) Assign potential fixed group members as listen keys on the assignment panel on
the screen.
7) From the Eclipse HX Downloads menu, click Apply and Reset.
EHX uploads the information to the assignment panel.
7.9.1 Keep hidden keys active (I-series panels)
1) In Advanced Settings for I-Series panels, select the Keep Hidden Keys Active
option. When this option is selected, audio paths from an I-Series panel’s main
page are maintained even when the panel operator switches to the shift (swap)
page.
2) Clear the check box to turn off this option. If this option is disabled the audio paths
from the main page are cut when the panel operator switches to the swap page.
This option is not selected by default.
209 Eclipse EHX Software User Guide