Clear-Com HX System Frames - Manual (Page 122)

1) In Hardware > Cards and Ports, navigate to an available slot number (marked
Empty). Do either of the following:
• Double click the slot.
• Right click the slot and select Set Card Type.
A drop-down menu is displayed, listing the available card types. Select the IVC-32
(Redundant) card.
Figure 5-29 IVC-32 Card Selection
The card properties for the IVC-32 (Redundant) card allow you to specify which IVC-32 to
provide redundancy for:
Figure 5-30 IVC-32 (Redundant) Card Properties
The following combinations of IVC-32 Cards and IVC-32 Redundant Cards are possible:
• One IVC-32 Card and one IVC-32 Redundant Card - the redundant card provides
backup for the only card in the system
122 Eclipse EHX Software User Guide