Clear-Com HX System Frames - Manual (Page 85)

Alias (remote matrix)
Specifies the remote system the trunk device is connected to. This is configured in
System and is displayed in Advanced Settings for information only. It cannot be set
using Advanced Settings.
Note: Only used on Trunk devices.
Comments
A scratchpad for engineers to record any relevant information about the port or device.
Description
The Description field in the port settings table.
Dial code
Allows the panel to dial out on a phone line using a preset key.
Note: Only on I-Series Panels.
Label
The Listen Label specified in the port settings table (a combined Talk/Listen label is shown
unless the option for 10 character labels is turned off).
Reserve port
Setting the port as shared reserves the port for trunked applications. Reserve port has no
function when systems are not fiber linked.
Note: Not available for AES Mono and Panel Aux.
Split label
If Split Label is set the first five characters and the last five characters of a label are
displayed separately. If this option is not set all ten characters are shown (on panels that
support ten characters).
Applies to:
The Description, Comments, Label and Port Number fields are available for all port
devices unless noted otherwise.
5.21.4 Panel options
The following Panel options are available:
Reply tally auto clear time
The time interval for automatic answerback in seconds. To adjust the time, select
answerback time to display the slider and set the time as required. The time can be set
from 0 to 60 seconds. The default is 10 seconds.
Display brightness
Sets the display brightness on panels that have a suitable display. To adjust the display
brightness select the brightness box to display the adjustment slider and use the mouse to
drag the slider to the required setting. The brightness is adjustable from 0 to 10. The
default setting is 0.
85 Eclipse EHX Software User Guide