Clear-Com HX System Frames - Manual (Page 77)

Figure 5-5 Select Hardware Type dialog
7) Click Next and then navigate to the MVX application code file (*.fwc):
a) Go to Software DVD > Eclipse HX-Omega-Median-Delta > xxxxxZ –
MVX Application (where xxxxxxZ represents the part number).
The folder contains the *.fwc file and a Read Me file (*.txt) with version
information.
b. Select the*.fwc file and click OK / Open.
8) Click Next and confirm that the details displayed are correct.
9) Click Next and confirm that the download commences.
10) When the download has completed, click Finish to close the update firmware
wizard.
11) Ensure that the MVX cards reset once the download is complete.
Reset should take approximately 1 minute.
12) When the download has completed, click Finish to close the update firmware
wizard.
Note: You can use the Firmware report tool in EHX to confirm the firmware version of the MVX
application code. To use the Firmware report tool:
1) Open EHX and go to System > Layout .
2) Right click the matrix icon.
3) Select Firmware > Firmware report.
77 Eclipse EHX Software User Guide