1 port number, 2 port function, 3 label – Clear-Com HX System Frames User Manual
Page 119: Port number, Port function, Label
Figure 5-26 IVC-32 Card Selection
Note:
A total of four E-QUE, IVC-32 or LMC-64 interface cards may be fitted to an Eclipse HX-
Omega.
This action adds an IVC-32 card to be used for communication over IP. Cards and Ports
show thirty two ports that can be configured for various IP compatible panels.
Figure 5-27 IP Ports
5.40.1
Port number
The port number on the IVC-32 card.
5.40.2
Port function
Selects the device attached to the port from a drop-down menu. Devices include IP
enabled V-Series panels and Concert panels.
5.40.3
Label
Label for the E1 direct port used to assign the port to a path. The label has 10 characters,
or can be split into two parts, each of maximum five characters.
119
Eclipse EHX Software User Guide
This manual is related to the following products: