Clear-Com HX System Frames - Manual (Page 160)

Menu options
Beltpack menu options
The setting determines the level of access the beltpack user has to the beltpack menus to
alter settings. The four settings are:
• Advanced - full access to all menu options and settings.
• Normal - beltpack microphone type and headphone limiter setting are locked, all
other options and settings are available.
• Basic - all beltpack options and settings are locked except contrast, master
volume, key lock, tap latch, page lock and information screens.
• None - all menus and settings are locked and cannot be viewed.
Fast key assign options
Default assign as talk and forced listen.
When true the default for a key assigned to this label is Talk and Forced Listen.
Enable assignment as a listen
Allow the port to be assigned locally using Fast Key Assign as a listen key by another
panel.
Enable assignment as talk
Allow the port to be assigned locally using Fast Key Assign as talk key by another panel.
Protect port from assignment
Prevents this port from being locally assigned by another panel in soft mode.
Beltpack programming
Beltpack programming (assigning labels to keys, setting beltpack operating parameters
and so on) is now carried out in Panel Programming treating the beltpack as a panel
where labels can be dragged and dropped onto keys in the same way as panels.
To program a beltpack select Panel programming from the Configuration menu and
select the required beltpack from the drop-down list of panels at the top of the window. The
beltpack mimic is displayed.
160 Eclipse EHX Software User Guide