1 fixed groups setup and configuration, Fixed groups setup and configuration – Clear-Com HX System Frames User Manual
Page 131
5.44.1
Fixed groups setup and configuration
To create a Fixed Group and assign members to that group the following steps should be
followed:
1)
Open Configuration > Fixed Groups.
Figure 5-37 Fixed Groups List
2)
Select the New button at the bottom left of the Groups window (top left window of
the screen).
3)
Replace the auto-filled Group Talk label with a meaningful label.
4)
Replace the auto-filled Group Listen label with meaningful label.
5)
Replace the auto-filled Group description with a more meaningful description.
6)
To add members select the select the required members from the Available
window (bottom left of the screen) and click on the > in the section between the
lower windows to transfer the members to the Attached window in the bottom
right of the screen. Alternatively double-clicking on the required item transfers it to
the Attached window. Also right clicking on a member of the Available group
displays a menu allowing it to be attached.
7)
To remove members from the group select the members to be removed in the
Attached window and click on the < symbol in the central section to return them
to the Available window. Alternatively double-clicking on the required member
moves it back to the Available group. Also right clicking on a member of the
Attached group displays a menu allowing it to be detached.
Fixed Groups can be made up of local and remote members (see 10 Networking).
131
Eclipse EHX Software User Guide