Clear-Com HX System Frames - Manual (Page 189)

2) To assign keys, click on the required item in the list of available talk and listen
labels, and then drag the items to the required key and drop them over the display
corresponding to the key. Right click on the mouse to confirm the assignment.
On rotary panels Listen and Talk are actioned by separate controls (rotary knob
for Listen, talk button for Talk) so different paths can be assigned for Talk and
Listen on the same key.
It is also possible to assign other keys to the Reply key on V-Series panels.
Figure 7-15 Assigning a Label on a Rotary Control Panel
Each blue display window is divided into and upper and lower section with the upper
section being the listen label and the lower section being the talk label. This corresponds
to the rotary push action to activate the listen route and the talk button below the display to
activate the talk route.
3) Position the mouse pointer over a key display/label to display the details of the
label.
Figure 7-16 V-Series Rotary Key Assignment
4) To display the action menu for a key, position the pointer over the label and right-
click the mouse.
189 Eclipse EHX Software User Guide