2 using the layout pane, Using the layout pane – Clear-Com HX System Frames User Manual
Page 240
2)
To set or change the password for a configuration type the password into the
Password field and then retype in the Confirm password field. Then click on the
Update Details to add the password to the configuration. The configuration must
be saved and closed before the password becomes operative.
EHX users with Admin rights can always open a configuration regardless of whether a
password has been set and reset the password if required. If an EHX user without Admin
rights opens a password protected configuration they are asked for the password.
Figure 10-3 Configuration Password Entry
The correct password must be entered to open the configuration. Once the configuration
has been opened by an EHX user with User rights that user may then change or remove
the password.
The configuration password may be removed by opening the configuration properties and
clearing both the Password and Confirm password fields and then saving the
configuration. The next time the configuration is opened it is no longer password protected.
10.1.2
Using the layout pane
The layout pane is accessed from the EHX menu pane. Below is a description of each
option.
The commands available to the user depend on whether the user has Admin rights.
Figure 10-4 System Screen
240
Eclipse EHX Software User Guide