Clear-Com HX System Frames - Manual (Page 215)

The type of source/destination is denoted by the color of the entry. These are:
•
Pink - Panel
•
Yellow - Partyline
•
Purple - Interface (Direct, FOR-22, Telephone, TEL-14, CCI-22)
•
Blue - Fixed Group
•
Green - Control
The tabs allow the grid to be displayed for the various properties of the connections (such
as Forced Listen, Latch Disable and so on).
2) Select one of the tabs to display a grid with sources and destinations which may
have this property and the status of any connection between them. For example,
selecting the Blocked Listen tab only displays panels and interfaces to which this
property can apply. Where the property is enabled a colored dot is displayed in
the square: red for local property assignment, black for global property
assignment.
You can filter the items along the top (destinations) by name using the text filter box on the
right hand side of the EHX Control Bar.
Figure 7-40 Source Filter
3) Enter the text to filter by and click on the filter icon to the right of the filter box left
filter icon). Only the destinations with names containing the filter text are
displayed on the top row. The sources are not filtered. To turn off filtering click on
the rightmost of the two filter icons.
Text Filter Box Filter
On
Filter
Off
215 Eclipse EHX Software User Guide