3 changing matrix ip address, Changing matrix ip address – Clear-Com HX System Frames User Manual
Page 273
• Warning
• Info
If no option is selected, no event in this category of messages causes an audio alert.
13.2.3
Changing matrix IP address
It may be necessary to change the IP address of a matrix. The sequence of steps to
change the IP address of a matrix via the event log is:
1)
After starting EHX open the configuration.
2)
Ensure that the PC is connected to the matrix via ethernet or a serial link.
3)
Open Matrix Event Log from the Diagnostics menu (see 13 Using the diagnostic
tools for details on the Matrix Event Log).
Note:
To display the Diagnostics menu at least one matrix must be configured
on the layout pane.
4)
To connect to the matrix, press Play.
Figure 13-9 Press Play to Connect to Matrix
5)
When connection is established click on the Request Info button which is
displayed beside the Play icon.
273
Eclipse EHX Software User Guide