2 fixed group attached controls, 3 fixed group basic options, Fixed group attached controls – Clear-Com HX System Frames User Manual
Page 132: Fixed group basic options
Note:
If you select a fixed group and select Find Usages in the Properties Pane, a list of ports
that are assigned is given.
5.44.2
Fixed group attached controls
Attachments can be attached to Fixed Groups that allow a Route, Relay or Speed Dial to
be activated via a secondary action.
1)
Open Configuration > Fixed Groups.
2)
Create a Fixed Group or select a Fixed Group that was been previously created.
3)
Expand Attached Control in the Properties window.
4)
Select Secondary Action in the Attached Control list.
5)
Select the drop down arrow and select the required control.
Figure 5-38 Fixed Group Attach Control Screen
5.44.3
Fixed group basic options
Basic Options displays the fixed information about a group and can be used to edit the
group description, Talk and Listen Aliases and Talk and Listen labels.
To enable/disable Basic Options
1)
Open the Fixed Groups screen by selecting the Fixed Groups link on the
Configuration menu
2)
Create a Fixed Group or select a Fixed Group that was been previously created
3)
Expand Basic Options in the Properties window.
132
Eclipse EHX Software User Guide