Clear-Com HX System Frames - Manual (Page 87)

Headset mic type
The Headset Mic Type allows the type of headset microphone to be configured. To set the
microphone type highlight the item to allow the drop-down menu to be displayed. The
options for headset microphones are Dynamic Balanced, Dynamic Unbalanced (default)
and Electret. This setting applies to headset 1 and 2.
Headset PTT function
The Push to Talk function allows the action for PTT to be selected. The options are No
Function, Activate All Talk Keys and Activate Two-Way Radio.
The default is No Function. This function is triggered by any of the PTT inputs on a panel.
In the case of V-Series panels this function only relates to XLR-4 and XLR-5 type headsets
that have been modified for PTT. V-Series XLR-7 headsets and headsets connected to the
auxiliary audio connector use the logic 1 and 2 inputs (see 5.21.14 Logic input options).
The effect of these functions are:
• No Function - PTT has no effect.
• Activate All Talk Keys - PTT activates audio paths on all latched talk keys. Non-
latching talk keys are not activated.
• Activate Two-Way Radio - PTT activates audio paths on all latched talk keys
connected to two-way radios (normally via a FOR-22 unit).
Note: Not available on Concert panels.
Headset LS cut
When enabled (True) this facility automatically cuts the audio to the panel loudspeaker if a
headset is detected. Highlight the option and use the drop-down menu to set the option to
True or False. The checkbox indicates whether the option is enabled.
Note: Only available on V-Series panels.
Listen again auto delete
The Listen again auto delete timeout sets the length of time in minutes before a message
recorded in the listen again buffer is automatically deleted. If the delay is set to 99 minutes
auto delete is disabled.
1) To set the listen again auto delete timeout highlight the option and click on the
drop-down menu to display the slider. Use the mouse to set the timeout to a value
of 0 to 99 minutes.
Note: Only available on V-Series panels.
Mute relay
If this is set to True the local panel GPO mute relay is fired when a Talk only key is
pressed. The default setting is false.
Nearby panel partial
This attribute affects the way that Nearby Panels configured in Local Advanced operate.
The Nearby Panel Partial attribute is set to True to enable audio from nearby panels to
be routed to the headset. If it is not set audio from nearby panels is cut completely to
prevent audio feedback.
87 Eclipse EHX Software User Guide