2 installing ehx, Backing up ecs 5.2.4 projects and configuration, Backing up ehx 7.0/7.1 projects and configurations – Clear-Com HX System Frames User Manual
Page 27: Installing ehx
2.2
Installing EHX
2.2.1
Backing up your existing projects and configurations
If you are upgrading from an earlier version of EHX/ECS, Clear-Com recommends backing
up your projects and configurations before you install EHX.
Backing up ECS 5.2.4 projects and configuration
To back up and export your exiting ECS 5.2.4 projects and configurations:
1)
Open the project you want to export.
2)
Select File > Export Project.
3)
Save the project to a location on your hard drive. The project is saved as a *.ccn
format file, which you can import later into EHXv7.5
Note:
EHX can open *.ccn format files as well as its own *.hxn format files.
4)
Repeat the above procedure for all the projects you want to save.
Backing up EHX 7.0/7.1 projects and configurations
To back up and export your exiting EHX 7.0/7.1 projects and configurations in Client
Server mode:
1)
Open the project you want to export.
2)
Select File > Export Project.
3)
Save the project to a location on your hard drive. The project is saved as a *.ccn
format file, which you can import later into EHXv7.5
Note:
EHX can open *.ccn format files as well as its own *.hxn format files.
4)
Repeat the above procedure for all the projects you want to save.
To back up and export your exiting EHX 7.0/7.1 projects and configurations in Client Only
mode:
5)
Open the project you want to export.
6)
Select File > Save Project.
7)
Save the project to a location on your hard drive. The project is saved as a *.ccn
format file, which you can import later into EHXv7.5
Note:
EHX can open *.ccn format files as well as its own *.hxn format files.
8)
Repeat the above procedure for all the projects you want to save.
27
Eclipse EHX Software User Guide