Local assignment, Interlock group – Clear-Com HX System Frames User Manual
Page 163
Local assignment
1)
Click on the Local Assignment entry to display the available options for local key
assignment. The options are to allow local key assignment and to disallow local
key assignment. If the local assignment is allowed for the key then the beltpack
key can be assigned by updating the beltpack with key assignments uploaded
from the matrix via the Upload control on the toolbar.
Interlock group
The EHX user can assign several keys on a beltpack into a selector group and restrict the
group so that only one key of the group can be activated at any one time. This function
only refers to talk paths.
Note:
For example if a beltpack had three keys programmed to talk to a cameras 1 to 3 then by
setting these into an interlocked group only one camera key can be selected at a time.
There are nine available interlocked groups to which the EHX user can assign any or all
beltpack keys.
To add a key to an interlocked group
1)
From Panel Programming, select the beltpack.
2)
Right click on the required key to display the key options list.
3)
Select the Interlock Group entry to display the interlock group options list.
4)
Select the required interlock group or None if the key is not to be in any interlock
group.
5)
The key may be added to other interlock groups as required.
6)
The key interlock groups are displayed in the key information popup.
163
Eclipse EHX Software User Guide